Sofa Slipcovers Buying Guide

1. Lay the cover on top of your sofa so that each corner is sitting where it will be fitted.
2. The one-way stretch fabric will allow you to pull your sofa cover so that it stretches acrosyour entire couch.
3. Starting in one corner, carefully pull the cover so that it covers the entire back cushion and corner.
4. Pull the cover to the opposite corner and repeat. This may take some coaxing but do persevere, this sofa cover is designed to fit snugly over your sofa.
5. Once in place, move to the front of your sofa and locate the wide, elasticated band located within the cover. You should easily find this by running your hand underneath the fabric.
6. Lift your seat cushions to a 45-degree angle and pull the elasticated band so that it sits underneath your cushions. Ensure this band is straight and that each cushion is on top of the band. This is vital for keeping your sofa cover in place.
7. After pushing your seat cushions into their normal position start at each corner and gently pull the cover so that it covers each sofa arm. Pull and push the sofa cover as you go so that it sits snugly into each corner.
8. Once fitted, ensure that all material is fitted tightly over your sofa, pulling material where necessary to ensure a snug fit.
9. The sofa cover is fully elasticated and the bottom edge will hug the bottom of your sofa.
10. Easy to clean, your cover can be washed at home at 30 degrees. Do not tumble
11. For larger 3 seater sofas, two people may be required to ensure a proper fit.

1. Before you begin, please ensure that your chair is in full recline with the foot rest up and seat tilted back. Your recliner cover set includes 4 separate pieces which need to be fitted separately.
2. The one-way stretch fabric will allow you to pull your recliner cover so that it stretches across your entire chair.
3. Start with the main seat, lay your cover out so that it is sitting where it will be fitted.
4. Starting at the top in one corner, carefully pull the cover so that it covers the entire back cushion and corner.
5. Pull the cover to the opposite corner and repeat. This will take some coaxing but do persevere, this recliner cover is designed to fit snugly over your chair.
6. Once the headrest is fitted, pull the cover down the chair, fitting it as you go. The sofa cover will fit snugly over the back of the chair, the seat and into each corner.
7. Fit each armrest cover by pulling it from the front to the back of each arm and then gently down each side. Ensure that each cover is well fitted at that the back of each armrest, you may need to recline your chair fully to check this.
8. Finally, fit your foot rest cover. Start at the top of the footrest, fitting it into each corner and pulling it down to the front of the foot rest. The elasticated edge will fit under the footrest, securing it in place.
9. Once finished, gently pull and coax the cover into shape, ensuring that there is no material grouping and that it fits securely into each corner.
10. Easy to clean, your cover can be washed at home at 30 degrees. Do not tumble dry. Ensure it is completely dry before re-fitting.

1. Lay the cover on top of your armchair so that each corner is sitting where it will be fitted.
2. The one-way stretch fabric will allow you to pull your armchair cover so that it stretches across your entire chair.
3. Starting in one corner, carefully pull the cover so that it covers the entire back corner.
4. Move over to the other corner and repeat.
5. Pull and coax the cover to ensure it fits snugly against the chair, pulling it down so that it covers the back cushion and back of the chair.
6. Once you reach the armrests, pull each side forward and cover each armrest and then gently down so that it fits the entire chair.
7. Starting on one side, ensure the cover fits your armchair snugly by pulling and shaping the cover, pushing it into corners, around the seat cushion and into the side wings of the armchair.
8. Once finished, gently pull and coax the cover into shape, ensuring that there is now material grouping and that it fits securely into the seat.
9. Easy to clean, your cover can be washed at home at 30 degrees. Do not tumble dry. Ensure it is completely dry before re-fitting.